Table of Contents
Advertisement
C H A P T E R
4
F E A T U R E S
All channels that are to be broadcast are given the destination "BTXnnn" (where nnn is a logical channel
number from 0 to 127). To receive this channel at a remote site, the corresponding code "BRXnnn" is
entered.
So at the hub, the voice configuration page might appear as follows:
Physical ports 1, 3and 4 are assigned to carry the three logical broadcast channels red, blue and green
respectively. At the first remote unit, the corresponding voice configuration page would appear as follows,
which picks out the second (blue) logical channel on port 1:
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 151 of 231
Advertisement
Table of Contents
