Table of Contents
Advertisement
C H A P T E R
4
F E A T U R E S
specific) is used to route the packet. A default route (one to use if all other route lookups fail) can be
configured by using a destination and mask value of 0.0.0.0. The following example shows a route table
that will send all traffic to network 192.168.0.1/255.255.255.0 via the unnumbered link 0:10, and all
other traffic to the next-hop gateway 192.168.3.100:
Example of IP Static Route Configuration
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 176 of 231
Advertisement
Table of Contents
