Table of Contents
Advertisement
C H A P T E R
3
C O N F I G U R I N G
V 1 0 0
3.4
Menu Structure
3.4.1
Basic Information
Once the user has entered an UP ARROW cursor key on the terminal selection screen, the following page
appears:
This is the Main Menu page. From here all of the submenu pages may be accessed by moving the
highlighted cursor up or down and pressing <ENTER>. To return up the menu tree, press <ESC> at any
time. The screen shown above is an example; the menu for each option card will only be shown if the card
is fitted.
All of the menu pages display the status lines at the top of the screen for information. At top left, the Node
Name of the currently logged unit appears. Below the "V100 Multiplexer Supervisor" banner, the
connection status of the aggregate links is displayed. In the example above, chassis data port 0:1 is
configured as an aggregate and has lost connection with a remote unit. Below this, the third line confirms
the current menu page.
At the bottom of the screen, the active configuration store (one of six – the seventh is for backup/reconfig
only) is shown and on the final line, a context-sensitive help line guides the user as to what may be
entered in the current field.
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 45 of 231
Advertisement
Table of Contents
