Use With Ip Aggregates - Vocality V100 Technical Manual

5.4

Use with IP Aggregates

The following example shows a unit with node number 0 connected to a unit with node number 1 over an
IP aggregate. Unit0 is configured with an IP address of 1.1.1.2/24. It is configured on an IP network with
a default gateway of 1.1.1.1. Unit1 is configured with an IP address of 2.2.2.2/24. It is configured on an
IP network with a default gateway of 2.2.2.1.
Before the IP aggregate itself is configured the system node numbers and base IP configuration should be
completed.
The System settings for the units are as follows:
V100 Versatile Multiplexer Technical Manual Version 2.2
C H A P T E R
IP
10/100BT
ETHERNET
Page 202 of 231
5 A P P L I C A T I O N
10/100BT
ETHERNET
E X A M P L E S