Table of Contents
Advertisement
C H A P T E R
4
F E A T U R E S
Example UDP Relay Table configuration
4.13.10 TCP Gateway –(TCP PEP)
The TCP gateway provides a TCP performance enhancing proxy (PEP) providing optimization of TCP traffic
carried over high latency aggregates. To enable the optimization the TCP gateway function must be
enabled on the IP network entries that the traffic is routed through. Up to 32 simultaneous TCP
connections may be optimized at any one time.
Note that the optimization feature only applies to TCP traffic that is routed through the V100, If the TCP
traffic is bridged, or the TCP traffic is encrypted within an IPSec tunnel then the optimization is not
performed.
4.13.11 DHCP Server/Relay
The V100 has three modes of operation for DHCP (Dynamic Host Configuration Protocol). The mode and
other DHCP parameters are configurable on the GENERAL page from the IP sub-menu.
The default mode is OFF – in this mode the V100 does not take part in DHCP operation – it is assumed
that all stations on the local network have a static IP configuration, or that a separate DHCP server is
available on the local network, or an externally routed network.
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 182 of 231
Advertisement
Table of Contents
