Table of Contents
Advertisement
The parameters and options are shown in the following table:
Field
Options always present
OPERATING MODE
LINE CLOCKING
LINE TERMINATION
LOOPBACK MODE
Options present only when "Operating Mode" is "Framed"
CRC 4
TSLOT ASSIGN
V100 Versatile Multiplexer Technical Manual Version 2.2
Options
Framed
Unframed
MASTER
SLAVE
75 Ohm, 120 Ohm
NONE
LOOP
ECHO
On, Off
Sub Menu
Page 102 of 231
C H A P T E R
3
C O N F I G U R I N G
Description
The E1 link is a 2.048MHz G.704 structured
link with 32, 64Kbps timeslots. In this mode
framing data is carried in Timeslot 0.
The E1 link is a 2.048MHz unstructured link.
The V100 provides a G.703 compliant clock
to the link.
The V100 recovers the clock from the link
Termination resistance applied to the line.
No loop back is present
Local loop. The card's Tx is looped to the Rx
Remote loop. Data Received by the link card
is transmitted back to the remote end
Selects whether G.704 Cyclic Redundancy
Check 4 error checking is carried out
Provides accesses to the timeslot
assignment submenu described in the
following section
V 1 0 0
Advertisement
Table of Contents
