Unnumbered Ip - Vocality V100 Technical Manual

V100 - Node2
V100 - Node3
Example of virtual port use

4.13.5 Unnumbered IP

The integrated IP router acts as a half-router – a pair of IP routers connected via the V100 network
provide the full router operation. To preserve IP addresses, the point-to-point link between the V100s
does not require an IP subnet configuration. When IP traffic is routed over the point-to-point connection, it
can only be received by the peer unit, and therefore IP addressing is not necessary. If host IP services are
run from the V100 across the V100 network, then the IP address on the Ethernet port can be used as the
source address for host communications. The sample IP,NETWORKS menu page below shows the
configuration of the IP virtual ports for Node1 from the earlier example.
Example configuration of IP virtual ports
V100 Versatile Multiplexer Technical Manual Version 2.2
0:10
0:10
Page 173 of 231
C H A P T E R 4
0:10
V100 - Node1
0:11
F E A T U R E S