Table of Contents
Advertisement
C H A P T E R
3
C O N F I G U R I N G
V 1 0 0
Users are encouraged to configure the ACCESS TIMEOUT on the SYSTEM screen to activate auto-logout.
NOTE: Users are advised not to configure the ACCESS TIMEOUT to less than 10 seconds.
Once a password has been entered it is effective until that session is completed with a CTRL-E command
or the session is inactive for the configured access timeout. - i.e. a CTRL-E to escape to the top-level
menu will require the user to re-enter the password (if configured) to continue.
In read-only access mode, the lines which divide the menu screens are composed of the tilde "~"
character. (In default or read-write mode they use the hyphen "-").
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 44 of 231
Advertisement
Table of Contents
