Table of Contents
Advertisement
DHCP Client
DHCP Server
DHCP Client
Network configuration when V100 DHCP server mode is OFF
In SERVER mode, the V100 has an embedded DHCP server that will respond to received requests from
clients:
DHCP Client
Embedded DHCP Server
Example network configuration for DHCP SERVER mode
The embedded DHCP server can provide the following host configuration parameters in response to
received DHCP requests:
IP Address, Lease Time, WINS Server, Domain, DNS Server Address
The IP address is assigned from the (inclusive) range configured in the GENERAL parameters – the
address range should be from the range of addresses on the subnet configured on the ENET port of the
V100. This range should not contain the address configured for the ENET port itself however. The DNS
V100 Versatile Multiplexer Technical Manual Version 2.2
V100
V100
Router
DHCP Server
V100
Page 183 of 231
C H A P T E R
4
F E A T U R E S
V100 Network
V100 Network
V100 Network
Advertisement
Table of Contents
