C H A P T E R
3
C O N F I G U R I N G
V 1 0 0
PROTOCOL
The PROTOCOL field can be configured with the value ANY or a name from the SERVICE MANAGEMENT
PROTOCOLS DEFINITIONS menu. The value ANY indicates any IP, UDP or TCP protocol/port combination.
RESULT
The RESULT field is used to define the operation should all the other elements of the filter match. The
entry may forward the traffic to a local port with an IP tributary (slot:port) or it may DISCARD the traffic.
NOTE: If an address or protocol definition that is in use in the SERVICE MANAGEMENT FILTER
TABLE is deleted then any entries that reference the deleted entry are also deleted.
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 97 of 231