Table of Contents
Advertisement
C H A P T E R
4
F E A T U R E S
On the SYSTEM menu, the HSC options have automatically been replaced by the two TDM card options,
one of which should be set according to the electrical interface standard to be used; the other of which
defines the Transmit Clock source. On the TDM card, the Receive Clock is always input from the network,
but the TDM TXC field allows some flexibility in clocking regime for the TX Clock:
On the ROUTING menu, the TDM card must be specified as the primary route to the corresponding V100,
which also has the TDM card fitted:
V100 Versatile Multiplexer Technical Manual Version 2.2
Page 164 of 231
Advertisement
Table of Contents
