Table of Contents
Advertisement
25 MODE
6.2
Setting method
This machine is provided with the 25 mode as an
adjustment method. This mode is used when the
memory board (MB) is rewritten or various settings
are made.
A. Procedure
1. Turn OFF the sub power switch (SW2) with the
main power switch (SW1) left ON.
2. While pressing the numeric keys 2 and 5 at the
same time, turn on the SW2. the "25 mode
menu screen" appears.
At this point, the machine enters the 25 mode
with normal copy operations unavailable.
3. Press the item keys on the liquid crystal dis-
play (LCD). A setting screen corresponding to
each item appears.
4. Confirm the input data on the setting screen of
each item.
5. Turn off the SW2 to release the 25 mode.
6. New data will be effective after restarting.
1
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
6.3
Setting software DIPSW
A. Setting method
The software DIPSW is set on "Software SW setting
screen."
Note:
• Please note that DIPSW bits are written into
the memory board (MB) each time a change is
made.
B. Meaning of the values displayed on the
screen
[1]
[1]
DIPSW number
[2]
Bit number (0 to 7)
[3]
Bit data : 1:ON, 0:OFF
[4]
8-bit switch values in indicated in hexadec-
imals from 00 to FF.
C. Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [1. Software SW setting] key.
3. "Software SW setting screen"
Select a DIPSW number by using the arrow
key on the left.
4. Select a bit number of the DIPSW by using the
arrow key on the right.
5. Select the ON (1) or OFF (0) of the DIPSW by
using the [ON] or [OFF] key.
6. Press the [PREVIOUS SCREEN] key to return
to the "25 mode menu screen".
• For each function of the DIPSW, see "List of soft-
ware DIPSW."
1-6
[2]
[3]
[4]
8050fs1026e
Advertisement
Table of Contents
