Table of Contents
Advertisement
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
3.5.2
Transmitting E-Mail
The following is an example of transmitting an E-mail with the aforementioned command to a copier.
You can use either upper and lower case characters when typing a command (option) in E-mail. *9
When transmitting an E-mail to a copier, take care of the following.
•
The ISW-designated mail has the period of validity. Therefore, set the date of mailer and time zone of
the copier *10 accurately.
•
One mail can be described with only one ISW command. If two or more commands are described, the
second and later ones are ignored.
•
Any mail software can be used. For example, mobile device mail, browser mail and so on.
•
With the mail software in use, transmit mails in text mode.
(Commands in mails in HTML mode cannot be handled correctly.)
•
Place at least one space or TAB *11 between command and option, and option and option described
in mails.
•
Type every command in mails only with alphanumeric one-byte characters (ASCII characters). If other
characters *12 are typed, an error mail with [Command not found] is returned.
•
Type every command in mails from the line head. Line head starting with a space or TAB is ignored.
•
Do not attach files or others to the mails transmitted to copiers.
Depending on the size of files, such mails may be handled as illegal mails and copier may refuse to
receive.
•
Do not type signatures in the mails transmitted to copiers. If auto signature addition is set on the mail
software, turn off the setting. Signatures may be handled as commands and error mails may be
returned from the copier.
*9
Case sensitivity is on for the file name. Take care when typing.
*10
Set in the E-mail transmission setting for [E-mail transmission setting].
*11
Linefeed is not available.
*12
Two-byte characters also cause errors. Take care not to use them.
(1) Transmitting ISW command
The transmission mail must have the following descriptions.
•
In Subject, type a CE password that has been entered in the mail reception setting.
For the details, please refer to the "4. E-Mail remote notification system".
•
In To, type mail address of a copier.
•
In Body, type a command.
2-21
INTERNET ISW
Advertisement
Table of Contents
