Table of Contents
Advertisement
OTHER ADJUSTMENTS
10. Fold the stacking assist unit [1] and insert 2
guide pins [3] on the stapler positioning jig [2]
into the holes [5] on the clincher [4].
Note:
• The stapler positioning jig is adequate to be
hooked on the clincher.
11. Rotate the gear [1] for the stapler /R downward.
Adjust the horizontal position of the clincher [4]
for the plate [2] attached to the cartridge to be
inserted into the slot [3] on the jig smoothly.
Then, adjust the horizontal position of the sta-
pler /R and the clincher /R. Then, rotate the gear
[1] downward further. Place the plate [2] onto
the slot [3] on the jig and fully insert the jig into
the clincher unit [4].
Note:
• Do not loosen the screws for the clincher at
this time.
• The stapler /R and the clincher /R must be
finely adjusted if the position is not matched.
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
[2]
[2]
1-176
[2]
[1]
[5]
[4]
[3]
8050fs1115
[3]
[4]
[1]
8050fs1116
Advertisement
Table of Contents
