KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
2. Open the door of the finisher and pull out the
stacker unit.
3. Remove the rail stopper fixing screw of the
stacker unit and pull further out the stacker unit.
Note:
• To prevent the finisher from falling down, be
sure to place a support beneath the unit that
has been pulled out.
4. Remove the stapler unit cover.
5. Remove the cartridge.
6. Loosen the fixing screws [3], 4 each, of the
clincher /F [1] and the clincher /R [2].
[1]
[1]
1-161
OTHER ADJUSTMENTS
[2]
[3]
[2]
[3]
[3]
8050fs1124
2