Table of Contents
Advertisement
JAM CODE LIST
Classifi-
Jam
cation
code
TU-109
J72-32
TMG-3
J72-33
J72-34
PI-110
J72-35
PK-120
J72-43
PK-5
PK-507
FS
J72-48
PI-110
J72-49
J72-50
J72-51
FS
J72-81
J72-82
2
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
Causes
After the folding paper exit sensor
(PS725) is turned ON, inlet sensor
(PS101) is not turned ON within the
specified time.
After the inlet sensor (PS101) is turned
ON, inlet sensor (PS101) is not turned
ON within the specified time.
After the conveyance motor (M101) is
turned ON, paper exit sensor (PS108)
is not turned OFF within the specified
time.
After the conveyance clutch /L (MC202)
is turned ON, PI passage sensor /L
(PS206) is not turned ON within speci-
fied time.
After the punch motor (M801) is turned
ON, punch HP sensor (PS801) is not
turned ON within the specified time.
After the folding passage sensor
(PS726) is turned ON, it is not turned
OFF within the specified time.
After the conveyance clutch /U
(MC201) is turned ON, PI passage sen-
sor (PS201) is not turned ON within the
specified time.
After the PI passage sensor (PS201) is
turned ON, FNS inlet sensor (PS704) is
not turned ON within the specified time.
After the PI passage sensor /L (PS206)
is turned ON, FNS inlet sensor (PS704)
is not turned ON within the specified
time.
After the stapler motor /F (M714) and
clincher motor /F (M715) are turned
ON, stapler HP sensor /F (PS731) and
clincher HP sensor /F (PS733) are not
turned ON within specified time.
After the stapler motor /R (M709) and
clincher motor /R (M710) are turned
ON, stapler HP sensor /R (PS730) and
clincher HP sensor (PS732) are not
turned ON within the specified time.
Resulting
operation
TU/FNS/main
body stop imme-
diately.
FNS/main body
stop immedi-
ately.
4-8
Correction
Remove jammed paper
in TU/FNS/main body,
if any.
Remove jammed paper
in the FNS/main body,
if any.
Advertisement
Table of Contents
