Table of Contents
Advertisement
36 MODE
5. For setting, press the key of an item you want
to set. Set the following 12 types of setting for
each exclusive paper A to J.
• 2nd transfer offset Side 1
Change the 2nd transfer current for 1-sided
mode.
+ direction: decrease current value
- direction: increase current value
• 2nd transfer offset Side 2
Change the 2nd transfer current for 2-sided
mode.
+ direction: decrease current value
- direction: increase current value
• Separation AC offset Side 1
Change the separation AC current for 1-sided
mode.
+ direction: increase current value up
- direction: decrease current value down
• Separation AC offset Side 2
Change the separation AC current for 2-sided
copy mode.
+ direction: increase current value up
- direction: decrease current value down
• Separation DC offset Side 1
Change the separation DC current for 1-sided
copy mode.
+ direction: increase current value up
- direction: decrease current value down
• Separation DC offset Side 2
Change the separation DC current for 2-sided
copy mode.
+ direction: increase current value up
- direction: decrease current value down
• Fixing (U) roller temp (idle) *1
Change the fixing upper roller control tempera-
ture while in the idling.
Setting range: 0 to 255 (unit: °C)
• Fixing (U) roller temp (print) *1
Change the fixing upper roller control tempera-
ture while in the printing.
Setting range: 0 to 255 (unit: °C)
• Fixing (L) roller temp (idle) *1
Change the fixing lower roller control tempera-
ture while in the idling.
Setting range: 0 to 255 (unit: °C)
2
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
• Fixing (L) roller temp (print) *1
Change the fixing lower roller control tempera-
ture while in the printing.
Setting range: 0 to 255 (unit: °C)
• Fixing (U and L) roller temp. difference
Change the control temperature difference
between fixing upper and lower rollers from
print start to 20th print.
Setting range: 0 (1°C) to 255 (256°C)
• Compulsion off (upper heater) paper width <
261 mm
Temperature to turn off the fixing upper roller
edge heater when printing paper less than 261
mm width (main scan direction). If it is lowered,
the paper edge crease is improved, however,
do not lower more than 10°C from the default
(215°C). Fixing related SC may occur.
Setting range: 0 to 255 (unit: °C)
• Compulsion off (upper heater) paper width >=
261 mm
Temperature to turn off the fixing upper roller
edge heater when printing paper 261 mm or
more width (main scan direction). If it is low-
ered, the paper edge crease is improved, how-
ever, do not lower more than 10°C from the
default (235°C). Fixing related SC may occur.
Setting range: 0 to 255 (unit: °C)
• Line speed
Select from 1/1, 1/2 and 1/3.
• CPM down
Widen paper intervals without changing the line
speed and make the print speed 1/2 to prevent
tacking.
• LCT fan
ON/OFF setting of LCT paper feed assist fan.
*1
For safety reasons, there is a temperature
limit. The temperature limit changes accord-
ing to other setting values.
6. Press the [PREVIOUS SCREEN] key to return
to the "User paper setting menu screen."
1-60
Advertisement
Table of Contents
