Remarks - Konica Minolta 8050 Service Manual

KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
C. Type 3: FW user → FW password → SITE host
This type requires an authentication to the proxy server itself when accessing outside.
It is necessary to enter information of the server that you wish to access, user name and password of the
proxy sever (firmware).
In case the user name and password of the proxy server are required when accessing outside via proxy
sever, this type may be used.
Command
Command Parameter
USER FW user
PASS FW password
SITE host
USER user
PASS password
D. FW user name → FW password → USER user@host
It is almost the same as Type 3. The only difference is a command at the authentication.
Apply this type when all the settings are set properly but communication fails with Type 3.
Command
Command Parameter
USER FW user
PASS FW password
USER user@host
PASS password
3.8.4

Remarks

• For fwtk2.1 (for unix) and Black Jumbo Dog (for Windows), authentication Type 1 is used.
• Type 1 is used in many proxy servers.
If you are not sure about the authentication type of the proxy server, KC recommends that you use
Type 1 in the meantime.
Reply Code Description
331 Sends user name of the proxy server
230 Sends password for the above user name
ftp expanded Sends program server's address
function:
Defined by
each server
331 Sends user name of the program sever
230 Sends password for the above user name
Reply Code Description
331 Sends user name of the proxy server
230 Sends password for the above user name
331 Sends user name of the program server and program
server's address
230 Sends password for the above user name
2-31
INTERNET ISW