Table of Contents
Advertisement
SAFETY AND IMPORTANT WARNING ITEMS
Ground Lead
• Pay attention to the point to which the ground lead is connected.
Connecting the ground lead to an improper point such as the points listed
below results in a risk of explosion and electric shock:
a. Gas pipe (A risk of explosion or fire exists.)
b. Lightning rod (A risk of electric shock or fire exists.)
c. Telephone line ground (A risk of electric shock or fire exists in the case
of lightning.)
d. Water pipe or faucet (It may include a plastic portion.)
Power Plug and Cord
• For the products that use the power cord set (inlet type), be sure to follow the
directions given below.
When securing measure is provided, secure the cord with the fixture prop-
erly.
a. Be sure to check to see if the power cord is securely inserted into the
main body side inlet.
b. When the fixing of the cord is indicated in the installation instructions,
be sure to fix it securely by using the fixing materials provided in the
same package.
c. When the power cord is damaged with its sheath broken, be sure to
replace it with the specified power cord set.
When the power cord is not securely inserted, an abnormal heat may gen-
erates due to a poor contact of the cord, thus resulting in a fire.
• Check whether the power cord is not stepped on or pinched by a table and
so on.
Overheating may occur there, leading to a risk of fire.
• Check whether the power cord is damaged. Check whether the sheath is
damaged.
If the power plug, cord, or sheath is damaged, replace with a new power
cord (with plugs on both ends) specified by KMBT. Using the damaged
power cord may result in fire or electric shock.
• Do not bundle or tie the power cord.
Overheating may occur there, leading to a risk of fire.
2
WARNING
WARNING
S-4
Advertisement
Table of Contents
