Table of Contents
Advertisement
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
6.7.2 Count of each parts
This is used when you want to control the part
counter.
Set the part name, part number and the limit value,
and display and reset the copy count.
Up to 30 data from No. 01 to No. 30 can be set. A
count is taken for each passage of paper, regard-
less of the paper size.
Reference:
• When the copy count is in excess of a limit
value, an asterisk [*] is shown to the left of No.
A. Setting of each replacement part and dis-
play of the copy count
(1) Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [5. Parts counter] key.
3. "Parts counter menu screen"
Press the [2. Count of each parts] key.
4. "Copy count of each part screen"
Press the arrow key to select a number you
want to set or change.
5. Press one of the [Parts name setting], [P/N
setting] and [Limit setting] key.
6. Press an item you want to set or change out of
the [Parts name setting], [P/N setting] and
[Limit setting] key, and enter it with the alpha-
numeric keys.
• [Part name setting]: Enter a part name (8 digits
in alphanumeric)
• [P/N setting]: Enter a part number (9 digits in
alphanumeric)
• [Limit setting]: Limit value (8 digits in numeric)
7. Press the [OK] key to update the data.
To invalidate the setting that you have
changed, press the [CANCEL] key.
B. Resetting of each replacement part
(1) Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [5. Parts counter] key.
3. "Parts counter menu screen"
Press the [2. Count of each parts] key.
4. "Count of each part screen"
Press the arrow key to select a number you
want to set or change.
5. Press the [COUNT RESET] key.
6. "Parts count reset screen"
Press the [YES] key when resetting a part
count. This resets the part counter.
Pressing the [NO] key returns to "Count of
each part" with the part count not reset.
1-47
25 MODE
Advertisement
Table of Contents
