Other Adjustments; Paper Feed Roller/Bp Pressure Adjustment - Konica Minolta 8050 Service Manual

KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004

9. OTHER ADJUSTMENTS

Caution:
• Make sure the power cord of the copier is
unplugged from the power outlet
9.1 Paper feed roller/BP pres-
sure adjustment
Perform the paper feed roller/BP pressure adjust-
ment when the no feed jam occurs at the bypass
feed.
A. Procedure
1. Pull out the ADU.
2. Install the piled plate [3] on the paper feed roller/
BP [2] with 2 screws [1].
3. Replace the ADU.
4. Perform the copy to check the paper feed oper-
ation.
5. Repeat steps 1 to 4 if the no feed jam continues
to occur at the paper feed.
Note:
• The weight plate (P/N:13FG4062*) is a supply
part. It should be purchased separately.
• Up to 4 plates can be used at a time.
• Perform "9.3 Pick-up movement amount
adjustment (bypass)" when the weight plate is
added.
1-139
OTHER ADJUSTMENTS
[1] [3] [2]
8050fs1050