Table of Contents
Advertisement
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
Introduction
Revision history
After publication of this service manual, the parts and mechanism may be subject to change for improvement
of their performance.
Therefore, the descriptions given in this service manual may not coincide with the actual machine.
When any change has been made to the descriptions in the service manual, a revised version will be issued
with a revision mark added as required.
Revision mark:
•
To indicate clearly a section revised, show
A number within
•
To indicate clearly a section revised, show
A number within
Note:
Revision marks shown in a page are restricted only to the latest ones with the old ones deleted.
• When a page revised in Ver. 2.0 has been changed in Ver. 3.0:
• The revision marks for Ver. 3.0 only are shown with those for Ver. 2.0 deleted.
• When a page revised in Ver. 2.0 has not been changed in Ver. 3.0:
• The revision marks for Ver. 2.0 are left as they are.
2004/12
2004/04
2003/08
Date
manual Ver.
represents the number of times the revision has been made.
represents the number of times the revision has been made.
1
3.0
2.0
1.0
—
Service
Revision mark
to the left of the revised section.
in the lower outside section of the corresponding page.
1
Change of design and correction of errors in writing
Change of design and correction of errors in writing
Issue of the first edition
Descriptions of revision
vii
Introduction
Advertisement
Table of Contents
