Selecting Language - MUTOH Rockhopper II series Maintenance Manual

2.4.5. Selecting Language

This chapter explains how to select the language on the display.
Japanese or English is selectable for the display language of the printer.
Follow the steps below to select the display language.
Step 1 :
Press the [POWER] key while pressing the [CANCEL] key on the operation panel.
Step 2 :
Press the [F1] key or [F2] key on the operation panel to change the parameter.
Step 3 :
Press the [POWER] key, and then press the [POWER] key again.
Rockhopper II series printers – Maintenance Manual
27 AP-74065, Rev. 1.2, 27/09/04