Selecting Panel Language - MUTOH ValueJet VJ-1324 Maintenance Manual

8.3 Printer Status
8.3.3

Selecting Panel Language

This section explains how to select the language displayed on Operation panel.
Follow the steps below to select the language.
NOTE
For this printer, you can choose the following:
Language: Japanese or English
°
Temperature: Celsius ( C) or Fahrenheit (
Length:mm or inch
• Selecting mode is displayed in only first start up.
1. Press [Power] key on Operation panel while
pressing [Cancel] key.
2. Select the language either from English or Japanese then press [Enter] to determine.
3. Select the temperature either from Celsius or Fahrenheit then press [Enter] to determine.
8.3.3 Selecting Panel Language
°
F).
4. Select the length either from mm or inch then press [Enter] to determine.
[+] key
[ - ] key [+] key
[ - ] key
[Enter]
[+] key
[ - ] key [+] key
[ - ] key
[Enter]
[+] key
[ - ] key [+] key
[ - ] key
[Enter]
5. The printer starts initial operation.
VJ1324E-M-02
Choose the language to be displayed
with the [+] key [ - ] key.
Choose the temprature to be displayed
with the [+] key/[ - ] key.
Choose the length to be displayed
with the [+] key/[ - ] key.
Printer starts initial operation.
P.8-10