Download Print this page

KYMCO GRAND DINK 250 Manual: Oil Pump Removal; Oil Pump Disassembly

Hide thumbs

Advertisement

4
. LUBRICATION SYSTEM

OIL PUMP REMOVAL

First drain the coolant.
Remove the right crankcase cover. ( 10-3)
Remove the A.C. generator starter driven
gear. ( 10-4)
Remove the attaching bolt and oil separator
cover.
Pry the circlip off and remove the oil pump
driven gear, then remove the oil pump drive
chain.
Remove the two oil pump bolts to remove the
oil pump.

OIL PUMP DISASSEMBLY

Remove the screw and disassemble the oil
pump as shown.
GRAND DINK 250
Bolts
Oil Separator Cover
Oil Pump Driven Gear
Circlip
Oil Pump
Bolts
4-4

Advertisement

Troubleshooting

   Also See for KYMCO GRAND DINK 250

Comments to this Manuals

Symbols: 0
Latest comments: