Download  Print this page

KYMCO GRAND DINK 250 Manual: Nuts/bolts/fasteners; Wheels/tires; Steering Handlebar; Suspension

Hide thumbs

Advertisement

3
. INSPECTION/ADJUSTMENT

NUTS/BOLTS/FASTENERS

Check all important chassis nuts and bolts for
looseness.
Tighten them to their specified torque values
if any looseness is found.

WHEELS/TIRES

Check the tires for cuts, imbedded nails or
other damages.
Check the tire pressure.
• Tire pressure should be checked when
tires are cold.
Tire Pressure
1 Rider
Front
1.75kg/cm²
Rear
2.00kg/cm²

STEERING HANDLEBAR

Raise the front wheel off the ground and
check that the steering handlebar rotates
freely.
If the handlebar moves unevenly, binds, or
has vertical movement, adjust the steering
head bearing.

SUSPENSION

Check the action of the front/rear shock
absorbers by compressing them several times.
Check the entire shock absorber assembly for
oil leaks looseness or damage.
Jack the rear wheels off the ground and move
the rear wheel sideways with force to see if
the engine hanger bushings are worn.
Replace the engine hanger bushings if there is
any looseness.
3-11
2 Riders
1.75kg/cm²
2.25kg/cm²
GRAND DINK 250
Pressure Gauge

Advertisement

   Also See for KYMCO GRAND DINK 250

Comments to this Manuals

Symbols: 0
Latest comments: