Brake System - KYMCO GRAND DINK 250 Manual

3
. INSPECTION/ADJUSTMENT
GRAND DINK 250
Coolant capacity : 1400±20cc
Radiator capacity : 1000±20cc
Reserve tank capacity : 400±20cc
Start the engine and check if there are no
bubbles in the coolant and the coolant level is
stable. Reinstall the radiator cap.
If there are bubbles in the coolant, bleed air
from the system.
Fill the reserve tank with the recommended
coolant up to the upper line.
Drain Bolt
Rear Brake Reservoir Front Brake Reservoir

BRAKE SYSTEM

BRAKE FLUID
Turn the steering handlebar upright and check
if the front/rear brake fluid level is at the
upper limit. If the brake fluid is insufficient,
fill to the upper limit.
Specified Brake Fluid: DOT-4
• The brake fluid level will decrease if
the brake pads are worn.
BRAKE DISK/BRAKE PAD
Check the brake disk surface for scratches,
unevenness or abnormal wear.
Check if the brake disk rubout is within the
specified service limit.
Check if the brake pad wear exceeds the wear
indicator line.
• Keep grease or oil off the brake disk to
avoid brake failure.
Wear Indicator Line
Brake Disk
3-10