KYMCO GRAND DINK 250 Manual page 69

6
. CYLINDER HEAD/VALVES
Remove the camshaft gear from the cam
chain to remove the camshaft.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Measure the cam lobe height.
Service Limits:
IN: 34.14mm replace if below
EX:34.02mm replace if below
Check each camshaft bearing for play or
damage. Replace the camshaft assembly with
a new one if the bearings are noisy or have
excessive play.
CAMSHAFT HOLDER DISASSEMBLY
Remove the valve rocker arms.
6-5
GRAND DINK 250
Cam Chain
Camshaft Gear
Camshaft Bearings
Valve Rocker Arms