OIL LEVEL INSPECTION
Stop the engine and support the motorcycle
upright on level ground.
Wait for 2 3 minutes and check the oil level
with the dipstick.
dipstick when making this check.
• Drain the oil while the engine is warm.
Remove the oil drain bolt to drain the engine
Install the aluminum washer and tighten the
oil drain bolt.
• Replace the aluminum washer with a
new one if it is deformed or damaged.
Pour the recommended oil through the oil
At disassembly: 1.1 liter
At change: 0.9 liter
Start the engine and check for oil leaks.
Stop the engine and recheck the oil level.
OIL FILTER SCREEN INSPECTION
Drain the engine oil.
Remove the oil filter screen and spring.
Clean the oil filter screen.
Install the oil filter screen, spring, and filter
Fill the engine with recommended engine oil.
Do not screw in the
Oil Filter Screen Cap
Oil Filter Screen
GRAND DINK 250