Final Reduction Gear Oil; Drive Belt - KYMCO GRAND DINK 250 Manual

3
. INSPECTION/ADJUSTMENT

FINAL REDUCTION GEAR OIL

• Place the motorcycle on its main stand
on level ground.
Stop the engine and remove the oil checks
bolt.
The oil level shall be at the oil check
blowhole.
If the oil level is low, add the recommended
oil SAE90# to the proper level.
Install the oil check bolt.
• Make sure that the sealing washer is in
good condition.
OIL CHANGE
Remove the oil check bolt.
Removes the oil drains bolt and drain the oil
thoroughly.
Install the oil drain bolt.
Torque: 9.8N-m
• Make sure that the sealing washer is in
good condition.
Fill the final reduction with the recommended
oil SAE90#.
Gear Oil Capacity:
At disassembly : 200cc
At change
Reinstall the oil check bolt and check for oil
leaks.

DRIVE BELT

Remove the left crankcase cover.
Inspect the drive belt for cracks or excessive
wear.
Replace the drive belt with a new one if
necessary and in accordance with the
Maintenance Schedule.
: 180cc
GRAND DINK 250
Oil Check Bolt Hole/Oil Filler
Oil Drain Bolt/Sealing Washer
Drive Belt
3-8