. A.C. GENERATOR/STARTER CLUTCH
RIGHT CRANKCASE COVER
Disconnect the water hoses from the right
Remove the nine bolts attaching the right
crankcase cover and the cover.
Remove the two pulser coil attaching screws
and the pulser coil.
Remove the three A.C. generator stator bolts
and the stator.
When removing the pulser coil and
stator, be careful not to damage them to
avoid shorted or broken wire.
Hold the flywheel with a flywheel holder and
remove the flywheel nut.
Remove the flywheel with a flywheel puller.
GRAND DINK 250
A.C. Generator Stator
Water Inlet Hose
Water Outlet Hose