KYMCO GRAND DINK 250 Manual page 204

17
. IGNITION SYSTEM
A .C. GENERATOR INSPECTION
EXCITER COIL/PULSER COIL
INSPECTION
This test is performed with the stator
installed in the engine.
Remove the frame right cover. ( 2-4)
Disconnect the A.C. generator connector.
Measure the exciter coil resistance between
the black/white wire terminal and ground.
Black/white Ground
Measure the resistance in the XΩ range.
For A.C. generator removal/installation, refer
to pages 10-3 and 10-6.
Disconnect the pulser coil wire coupler.
Measure the pulser coil resistance between
the blue/white and green/white wire
terminals.
Blue/white Green/white
23 35KΩ
50 170Ω
GRAND DINK 250
Pulser Coil Wire Coupler
17-4