KYMCO GRAND DINK 250 Manual page 191

15
. REAR BRAKE/REAR FORK/REAR
WHEEL/REAR SHOCK ABSORBER
REAR WHEEL
REMOVAL
Remove the exhaust muffler. ( 2-6)
Remove the rear brake caliper. ( 15-3)
Remove the rear fork.
Remove the rear axle collar.
Remove the rear wheel.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 1.0mm replace if over
Axial: 1.0mm replace if over
INSTALLATION
The installation sequence is the reverse of
removal.
Torque:
Rear shock absorber lower mount bolt:
19.6 29.4N-m
Rear axle nut: 78.4 98N-m
ADJUSTABLE REAR CUSHION
To suit scooter behaviour to load condition
rear cushion could be adjusted in spring
prelocad.
It is possible to adjust rear cushion in five
positions:
A position "soft"
B position "medium"
C position "hard"
When you adjust rear cushion, the spring
preload of rear cushions must be the same.
GRAND DINK 250
Rear Brake Disk
Shock Absorber Lower Mount Bolt
Brake Caliper Bolts
3
2
1
A
Rear Axle Collar
Axle Nut
C
5
4
B
15-6