. FINAL REDUCTION
After installation, fill the transmission case
with the specified oil.
• Place the motorcycle on its main stand
on level ground.
• Check the oil-sealing washer for wear
Specified Gear Oil: SAE90#
At disassembly : 0.2 liter
Install and tighten the oil check bolt.
Torque: 7.8 11.8N-m
Start the engine and check for oil leaks.
Check the oil level from the oil check bolt
hole and add the specified oil to the proper
level if the oil level is low.
: 0.18 liter
GRAND DINK 250
Oil Check Bolt Hole/Oil Filler