KYMCO GRAND DINK 250 Manual page 168

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• Remove the motorcycle frame covers before removing the front wheel, steering handlebar, front
shock absorber and front fork.
prevent the motorcycle from falling down.
• During servicing, keep oil or grease off the brake pads and brake disk.
SPECIFICATIONS
Axle shaft runout
Front wheel rim runout
Front shock absorber spring free length
Brake disk thickness
Brake disk runout
Top brake caliper piston O.D.
Top brake caliper cylinder I.D.
Under brake caliper piston O.D.
Under brake caliper cylinder I.D.
TORQUE VALUES
Steering stem lock nut
Steering top cone race
Front shock absorber bolt
Front axle nut
Brake caliper bolt
SPECIAL TOOLS
Lock nut wrench
Front shock absorber compressor
Ball race remover
Driver handle
Outer driver, 37x40mm
Pilot, 12mm
Bearing remover
Bearing remover head, 12mm
Jack the motorcycle front wheel off the ground and be careful to
Item
Radial
Axial
78.4 117.6N-m
4.9 12.7N-m
19.8 24.5N-m
44.1 49N-m
24.5N 34.3N-m
Standard (mm) Service Limit (mm)
⎯
⎯
⎯
240.6
3.8 4.2
⎯
26.94 26.97
27.00 27.05
33.90 33.93
33.96 34.01
GRAND DINK 250
0.2
2.0
2.0
233
3.0
0.30
26.91
27.00
33.87
34.01
14-2