4
. LUBRICATION SYSTEM
OIL PUMP REMOVAL
First drain the coolant.
Remove the right crankcase cover. ( 10-3)
Remove the A.C. generator starter driven
gear. ( 10-4)
Remove the attaching bolt and oil separator
cover.
Pry the circlip off and remove the oil pump
driven gear, then remove the oil pump drive
chain.
Remove the two oil pump bolts to remove
the oil pump.
OIL PUMP DISASSEMBLY
Remove the screw and disassemble the oil
pump as shown.
GRAND DINK 250
Bolts
Oil Separator Cover
Oil Pump Driven Gear
Circlip
Oil Pump
Bolts
4-4