Oil Pump Removal; Oil Pump Disassembly - KYMCO DINK 200 Manual

Table of Contents

Advertisement

4
DINK 200
. LUBRICATION SYSTEM
Bolts

OIL PUMP REMOVAL

First drain the coolant.
Remove the right crankcase cover. (  10-3)
Remove the A.C. generator starter driven
gear. (  10-4)
Remove the attaching bolt and oil separator
cover.
Oil Separator Cover
Pry the circlip off and remove the oil pump
driven gear, then remove the oil pump drive
chain.
Oil Pump Driven Gear
Circlip
Oil Pump
Remove the two oil separator bolts to remove
the oil pump.
Oil Separator

OIL PUMP DISASSEMBLY

Remove the screw and disassemble the oil
pump as shown.
4-4

Advertisement

Table of Contents
loading

Table of Contents