KYMCO GRAND DINK 250 Manual page 124

11
. CRANKCASE/CRANKSHAFT
Place the left crankcase down and install the
crankshaft into the left crankcase.
• Avoid damaging the oil seal.
• Apply grease to the lip of the oil seal.
Install the two dowel pins and a new gasket.
Place the right crankcase over the crankshaft
and onto the left crankcase.
• Install the right crankcase squarely and
do not tap it with an iron or plastic
hammer.
Install and tighten the right and left crankcase
attaching bolts.
Torque: 7.8 10.8N-m
GRAND DINK 250
Gasket
Dowel Pins
Right Crankcase
Left Crankcase
Bolts
11-6