Proxim Orinoco AP-2500 User Manual page 85

Network Parameters
6. Enter additional address ranges, if necessary.
7. Click the back button to return to the previous screen.
8. Place a check mark in the Enable Access Control box.
9. Click OK.
Once enabled, only those IP addresses that fall within the ranges specified in the IP Access Table will have access to
the AP's management interfaces over the Ethernet network. To delete an entry, click Edit and select Destroy from the
Status pull-down menu.
NOTE: You cannot enable Access Control unless one or more IP Address ranges exist in the IP Access Table. Also,
if you remove all entries from the table, Access Control will be automatically disabled (that is, the AP will
automatically remove the check mark from the Enable Access Control box).
85