Dat Sessions - Proxim Orinoco AP-2500 User Manual

Monitor Information

DAT Sessions

The AP performs Dynamic Address Translation (DAT) to provide subscribers with access to the Internet. See
Address Translation (DAT)
The Current Subscriber DAT Sessions screen displays the active DAT sessions for each subscriber. The subscriber
is identified by the IP address and MAC address of his/her wireless card.
NOTE: To delete all current subscriber sessions without rebooting the device, check the Delete All Sessions box and
click OK. Current subscriber connections will be terminated.
The SubPort identifies the source port that the subscriber is using; the NetPort identifies the port that the AP maps
with its IP address to send out the subscriber's packet.
For UDP sessions, the SessState is MAPPED (meaning the subscriber's port has been mapped to a port on the AP
for address translation purposes).
For TCP sessions, the SessState is ESTABLISHED (for open connections), TIME WAIT (for pending connections), or
CLOSED (for closed connections).
Figure 6-7 Current Subscriber DAT Sessions Screen
for details.
Dynamic
177