Troubleshooting - Proxim Orinoco AP-2500 User Manual

ORiN

Troubleshooting

This chapter contains troubleshooting advice for the AP-2500. If you are unable to resolve your issue, see
Support for information on how to contact a support representative.
• Troubleshooting Concepts
• Symptoms and Solutions
• Connectivity Issues
• AP-2500 Unit Will Not Boot - No LED Activity
• Serial Link Does Not Work
• Ethernet Link Does Not Work
• Basic Software Setup and Configuration Problems
• Lost AP-2500, Telnet, or SNMP Password
• Client Computer Cannot Connect
• AP-2500 Has Incorrect IP Address
• HTTP (browser) or Telnet Interface Does Not Work
• HTML Help Files Do Not Appear
• Telnet CLI Does Not Work
• TFTP Server Does Not Work
• Client Connection Problems
• Client Manager Finds No Connection
• Client PC Card Does Not Work
• Intermittent Loss of Connection
• Client Does Not Receive an IP Address - Cannot Connect to Internet
• VLAN Operation Issues
• Active Ethernet
• The AP-2500 Unit Does Not Work
• There Is No Data Link
• "Overload" Indications
• Recovery Procedures
• Reset to Factory Default Procedure
• Forced Reload Procedure
• Setting IP Address using Serial Port and Normal CLI
• System Alarms (Traps)
• Security Alarms
• Wireless Interface Card Alarms
• Operational Alarms
• FLASH Memory Alarms
• TFTP Alarms
• Image Alarms
• Standard MIB-II (RFC 1213) Alarms
• AAA Alarms
• Related Applications
• RADIUS Server
• TFTP Server
8
Technical
186