Dhcp Server Parameters - Proxim Orinoco AP-2500 User Manual

Using the Command Line Interface

DHCP Server Parameters

A DHCP server assigns a "dynamic" IP address to devices connected to the network. The AP-2500 can behave as a
DHCP server or as a DHCP relay (routed to an external DHCP
Name
DHCP
DHCP Service
DHCP Server Enable
DHCP Server Table
DHCP Pool Index
DHCP Server IP
DHCP Server Subnet
Mask
DHCP Lease Pool IP
Start
DHCP Lease Pool IP
Stop
DHCP Lease Duration
DHCP Public Pool
DHCP IP Upsell
Service
DHCP Default Pool
DHCP Pool Status
DHCP Lease Table
Lease Table Index
IP Address
Client ID
Lease Status
DHCP Relay Service
DHCP Relay Agent IP
DHCP Relay Server IP
Type Values
Group N/A
Integer disable (0)
enable (1)
Integer disable (0)
enable (1)
Table N/A
Index N/A
IpAddress User Defined
IpAddress User Defined
IpAddress User Defined
IpAddress User Defined
Integer 0..65536
Integer false (0)
true (1)
Integer disable (0)
enable (1)
Integer false (0)
true (1)
Integer active (1),
notInService (2),
notReady (3),
createAndGo (4),
createAndWait (5),
destroy (6)
Table N/A
Counter N/A
IpAddress N/A
MacAddress N/A
Integer available (0),
reserved (1)
Integer disable (0)
enable (1)
IpAddress User Defined
IpAddress User Defined
Access CLI Parameter
R ndxdhcp
RW/Reboot dhcpDisable
RW/Reboot dhcpServerEnable
RW dhcpServerTable
R dhcpPoolIndex
RW/Reboot dhcpServerIP
RW/Reboot dhcpServerNetmask
RW/Reboot dhcpPoolStartIP
RW/Reboot dhcpPoolStopIP
RW/Reboot dhcpLeaseMinutes
RW/Reboot dhcpPublicPool
RW/Reboot dhcpIpUpsell
RW/Reboot dhcpDefaultPool
RW/Reboot dhcpPoolStatus
R dhcpLeaseTable
R leaseIndex
R leaseAddress
R leaseCLID
R leaseStatus
RW/Reboot dhcpRelayEnable
RW/Reboot dhcpRelayAgentIP
RW/Reboot dhcpRelayServerIP
223