System Parameters; Miscellaneous System Parameters - Proxim Orinoco AP-2500 User Manual

Using the Command Line Interface
• Passthrough Parameters
• Passthrough IP Table
• Passthrough DNS Table
• AAA Passthrough Port
• Bandwidth Management Parameters
• Billing Parameters - Configure billing plans and bill mirroring for internal authentication
• Billing Mirroring Parameters
• Billing Plans Configuration
• Subscriber Messages Parameters
• Authorized Subscribers Table
• Current Subscribers Table
• Miscellaneous Parameters
• CLI Monitoring Parameters

System Parameters

Name
System
Name
Location
Contact Name
Contact E-mail
Contact Phone
FLASH Backup Interval
Flash Update
System OID
Descriptor
Up Time
Emergency Restore to defaults

Miscellaneous System Parameters

Name Type
NSE System Group
System Unit ID DisplayString Size(1..32)
Number
System Reboot Integer
Bridge Mode Integer
System Version DisplayString Size(1..32)
SNMP Version DisplayString Size(1..32)
- Specify free content or walled garden sites for unauthenticated users
- Enable bandwidth management control for subscribers
- Configure the user interface presented to subscribers by internal web server
- Manage list of authorized subscribers
- View list of subscribers associated with AP
- Set VPN parameters and partner image for connecting page
- View AP-2500's statistics
Type Values
Group N/A
DisplayString User Defined
DisplayString User Defined
DisplayString User Defined
DisplayString User Defined
DisplayString User Defined
max 254 characters
Integer 0 - 65535 seconds
0
1
DisplayString N/A
DisplayString System Name, flash version,
S/N, bootloader version
Integer dd:hh:mm:ss
dd – days
hh – hours
mm – minutes
ss – seconds
Resets all parameters to
default factory values
Values
N/A
N/A
Enable (1)
disable (0)
enable (1)
N/A
N/A
Access CLI Parameter
R system
RW sysname
RW sysloc
RW sysctname
RW sysctemail
RW sysctphone
RW sysflashbckint
RW sysflashupdate
R sysoid
R sysdescr
R sysuptime
RW sysresettodefaults
Note: You must enter the
following command twice to
reset to defaults:
set sysresettodefaults 1
Access CLI Parameter
R nse
R systemUsgId
W systemReboot
RW systemBridgeMode
R systemVersion
R snmpVersion
221