Passthrough Ip Table; Passthrough Aaa Port - Proxim Orinoco AP-2500 User Manual

Public Space Parameters
5. Enter the DNS name to filter in the DNS Name field and click OK.
• Enter "www.myhotspot.com" to allow access to a specific web address.
• Enter "*.myhotspot.com" to allow access to all sites associated with the specified DNS name.
• Do not include port, protocol, or path information when enter DNS names.
6. Enter a second DNS name (if applicable) and click OK. Continue until you have entered all of the names you
want to add to the table.
7. Click the back arrow button to return to the previous screen.
8. Reboot the AP.
If you later want to edit or delete an entry, click the Edit button.
• To delete an entry, change the Status to Destroy.
• Only Active and Destroy are valid options within the Status field when using the Web browser interface.

Passthrough IP Table

1. Login to the AP's Web browser interface.
2. Click PublicSpace > Passthrough > IP/DNS.
3. Place a check mark in the Enable Passthrough Address box.
4. Click the Add button below the Passthrough IP Table heading.
5. Enter the IP address to passthrough in the IP Address field and click OK.
6. Enter a second IP address (if applicable) and click OK. Continue until you have entered all of the IP addresses
that you want to passthrough.
7. Click the back arrow button to return to the previous screen.
8. Reboot the AP.
If you later want to edit or delete an entry, click the Edit button.
• To delete an entry, change the Status to Destroy.
• Only Active and Destroy are valid options within the Status field when using the Web browser interface.

Passthrough AAA Port

The DNS and IP Passthrough tables only apply to WWW-HTTP traffic on port 80. You can enable passthrough traffic
on a second port if necessary for AAA purposes.
For example, if you have a secure custom login page on an External Web Server, you can enable HTTPS traffic on
port 443 so that unauthenticated users can access the page. This will allow the AP to pass HTTPS traffic for
unauthenticated users. This is in addition to the standard port 80 traffic that the AP passes based on the IP and DNS
Passthrough Tables.
Follow these steps to enable a Passthrough AAA Port:
1. Login to the AP's Web browser interface.
2. Click PublicSpace > Passthrough > AAA Port.
3. Place a check mark in the Enable Passthrough Port box.
4. Enter the AAA port in the Passthrough Port Number field.
• Do not enter port 80, 2111, 1111, or 1112.
5. Click OK.
6. Reboot the AP.
151