Proxim Orinoco AP-2500 User Manual page 225

Using the Command Line Interface
Name
Auto Channel Select (ACS)
Interference Robustness
DTIM Period
Operating Frequency Channel
RTS/CTS Medium Reservation
Multicast Rate
Closed Wireless System
Load Balancing
Medium Distribution
MAC Address
Supported Data Rates
Transmit Rate
Supported Frequency Channels
Physical Layer Type
Regulatory Domain List
NOTE: There is an inter-dependent relationship between the Distance between APs and the Multicast Rate. In
general, larger systems operate a lower average transmit rates.
Distance between APs
Large
Medium
Small
Minicell
Microcell
Wireless Distribution System (WDS) Parameters
NOTE: These parameters only apply to 802.11b radios.
Type Values
Integer enable (default)
disable
Integer enable (default)
disable
Integer 1 – 65535
1 = default
Integer 1 - 11 (FCC) (3 = default)
1 - 13 (ETSI) (3 = default)
1 - 14 (JP) (3 = default)
10 - 13 (FR)
(10 = default)
Integer 0 – 2347
Default is 2347 (off)
Integer 1 Mbit/sec (1)
2 Mbit/sec (2) (default)
5.5 Mbit/sec (3)
11 Mbit/sec (4)
Integer enable
disable (default)
Integer enable (default)
disable
Integer enable (default)
disable
PhyAddress 12 hex digits
Octet String Reported in 500 Kb/sec
intervals:
2 (1 Mbit/sec)
4 (2 Mbit/sec) (default)
11 (5.5 Mbit/sec)
22 (11 Mbit/sec)
Integer32 Reported in 500 Kb/sec
intervals:
0 (auto fallback)
2 (1 Mbit/sec)
4 (2 Mbit/sec) (default)
11 (5.5 Mbit/sec)
22 (11 Mbit/sec)
Octet String Depends on Regulatory
Domain
Integer dsss (direct sequence
spread spectrum) for
802.11b
DisplayString USA (FCC)
Canada (DOC)
Europe (ETSI)
Spain (SP)
France (FR)
Japan (MKK)
Multicast Rate
1 and 2 Mbits/sec
1, 2, and 5.5 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
Access CLI Parameter
RW autochannel
RW interrobust
RW dtimperiod
RW channel
RW medres
RW multrate
RW closedsys
RW ldbalance
RW meddendistrib
R macaddr
R suppdatarates
RW txrate
R suppchannels
R phytype
R regdomain
225