Proxim Orinoco AP-2500 User Manual page 28

Installation & Basic Configuration
Figure 2-7 Slide a PC Card into the AP
NOTE: If you want to install a second 802.11b wireless card in Slot B, you will first need to remove the slot cover
(which is provided for plenum-rating purposes). See
install a 5 GHz kit, see
6. Attach one end of an Ethernet cable to the AP's Ethernet port and the other end to a network hub or switch.
7. Connect the unit's power supply to a power source.
8. Wait for the power LED to turn green before proceeding.
Figure 2-8 Power LED turns green when the unit is operational
9. Determine the best location for your device.
NOTE: Proxim recommends that you perform a Site Survey prior to determine the installation location for your
AP-2500. For information about how to conduct a Site Survey, contact your local reseller.
5 GHz Kit Installation.
Installing a Card in Slot B for instructions. If you want to
28