Proxim Orinoco AP-2500 User Manual page 74

Network Parameters
Figure 4-8 VLAN Configuration Screen (Wireless A and Wireless B Use Same VLAN ID)
1. Login to the Web interface.
2. Click Configure > Interfaces > Wireless A.
3. Set the SSID for card A.
4. Click the Wireless B tab.
5. Set the SSID for card B (this can be the same SSID as card A).
6. Click Network > VLAN.
7. Set the VLAN ID for the card in Slot A to a value between 1 and 4094.
8. Set the VLAN ID for the card in Slot B to the same value configured for the card in Slot A.
9. Place a check mark in the Enable VLAN Protocol box.
10. Click OK.
11. Configure the wireless client with one of the two Network Names based on VLAN membership.
74