Current Subscribers Table - Proxim Orinoco AP-2500 User Manual

Monitor Information

Current Subscribers Table

This table lists all of the active subscribers that are communicating with the AP. (See
and the Current Subscribers Table
This table can hold up to 50 entries.
Users who are associated with the AP wirelessly but are unauthenticated appear in the table with State set to
Pending. Once a user has been authenticated (by the AP, a RADIUS server, or an External Web Server), the AP
updates the user's entry and changes the State to Valid.
The AP reports the following information for each subscriber:
• User Name (if applicable)
• IP address of user's wireless card
— In the example below, dcrispin received an IP address from the AP via DHCP and Edgar is using a static
IP address (but the AP's DAT functionality accounts for this and the user is unaware that his IP address is
misconfigured for the hotspot's network).
• MAC address of user's wireless card
• State
— Set to Pending for devices that have associated to the AP wirelessly but are not yet authenticated.
— Set to Valid after a device or user has been authenticated.
• Proxy
— Reports if the AP detected proxy server settings on the subscriber's Web browser and is redirecting the
traffic as necessary
• BwUp: Subscriber's upstream bandwidth limit
• BwDown: Subscriber's downstream bandwidth limit
• BytesSent: Number of bytes sent by the subscriber (upstream)
• Bytes Received: Number of bytes received by the subscriber (downstream)
• BytesTotal: Sum of BytesSent and BytesReceived
• Status
— Should be Active at all times.
— Change to Destroy to delete an entry.
Figure 6-6 Current Subscribers Screen
for an explanation of how this table differs from the Authorized Subscribers Table.)
Authorized Subscribers Table
175