Set Wep Encryption For Each Wireless Interface - Proxim Orinoco AP-2500 User Manual

Public access ap
Hide thumbs Also See for Orinoco AP-2500:
Table of Contents

Advertisement

Using the Command Line Interface
Figure A-13 Results of "show wif" CLI command

Set WEP Encryption for each Wireless Interface

3 = wireless card in Slot A
4 = wireless card in Slot B
CAUTION: Client stations must have the same encryption key to be able to communicate with the AP-2500 device.
Each Wireless Interface can only support one Key Length (so each of the configured keys must have the
same length). The available key sizes vary based on card type. See
For the wireless card in Slot A
You can set up to four encryption keys. This example describes setting encryption Key 1 on the wireless card in Slot A.
[Device Name]>set wifsec 3 encrypt enable encryptkey 1
<WEP key (5-13 characters long depending on card type)> encryptkeytx 1
[Device Name]>show wifsec<CR>
Encryption
for more information.
215

Advertisement

Table of Contents
loading

Table of Contents