(List Commands) - Proxim Orinoco AP-2500 User Manual

Using the Command Line Interface
• search - Lists the parameters in a specified Table
• upload - Uses TFTP server to upload "config" or "generic" files from AP to TFTP default directory or specified path

? (List Commands)

This command has varied uses to display commands and parameters, depending on the operation in which it is used.
The following table lists each operation and provides a basic example. Following the table are detailed examples and
display results for each operation.
Operation
Display the Command List (Example 1)
Display commands that start with specified letters (Example 2)
Display parameters for set and show Commands (Examples 3a and 3b)
Prompt to enter successive parameters for Commands (Example 4)
Example 1. Display Command list
To display the Command List, enter "?"
[Device Name]>?<CR>
Returns the following:
Figure A-3 Result of "?" CLI command
Example 2. Display specific Commands
To show all commands that start with specified letters, enter one or more letters, then "?" with no space between
letters and "?".
[Device Name]>s?<CR>
Returns the following:
Figure A-4 Result of "s?" CLI command
Example 3. Display parameters for set and show
Example 3a allows you to see every possible parameter for the set (or show) commands. Notice from example 3a that
the list is very long. Example 3b shows how to display a subset of the parameters based on initial parameter letters.
Basic Example
[Device Name]>?
[Device Name]>s?
[Device Name]>set ?
[Device Name]>show ipa?
[Device Name]>download?
203